INFLUENCE FACTORS ON THE FORMATION OF MECHANICAL PROPERTIES AND STRUCTURE OF STEEL FOR MANUFACTURE OF RAILWAY AXES
DOI:
https://doi.org/10.34185/1991-7848.itmm.2024.01.022Keywords:
ballistic resistance, fragmentation, vibration processing, destruction mechanism, microstructureAbstract
The article investigated the features of the destruction and deformation of metal plates made of 30CrNi2Mo steel after ballistic tests. The peculiarity of the experiment was that during the test, the plates was additionally subjected to vibration at frequencies of 10 and 20 Hz. The perspective of the impact of vibration on the ballistic stability of plates has been revealed. After the experiment, through-holes of fragmentation and petal types with subsequent cracking were found in the static plates. Cracking propagates deep into the undeformed plate. The application of vibration showed a significant improvement in ballistic properties. When applying the combined test, a change in the resistance of the target was detected. Namely, the plastic component of the metal around the hole was increased and bullet fragments were found that remained on the surface of the plate after the test. It is shown that the further application of vibration is a promising direction for increasing the ballistic resistance of materials.
References
Jo M., Kim S., Suh D., Kim. H., Kim Y., Sohn S., Su L. Enhancement of ballistic performance enabled by transformation-induced plasticity in high-strength bainitic steel. Journal of Materials Science & Technology. – 2021. № 84. DOI: 10.1016/j.jmst.2020.12.059
Pai A., Rodríguez M., Marcos B., Masuhiro V.-M., Borja S. Experimental techniques for performance evaluation of shielding materials and configurations subjected to Blast and Ballistic impacts: A State-of-the-Art Review. Thin-Walled Structures. – 2023. № 191. С. 111067. DOI: 10.1016/j.tws.2023.111067
Puica C., Trană E., Pupaza C., Turtoi, С., Rotariu A., Pană I.-F. Experimental and Numerical Study on Perforated Plate Mitigation Capacity to Near-Field Blasts. Materials. – 2023. № 16. С. 4255. DOI: 10.3390/ma16124255
Acar D., Canpolat B., Cora Ö. N. Ballistic performances of Ramor 500, Armox Advance and Hardox 450 steels under monolithic, double-layered, and perforated conditions. Engineering Science and Technology, an International Journal. – 2024. № 51. С. 101653. DOI: 10.1016/j.jestch.2024.101653
Bekci M., Canpolat B., Usta E., Güler M., Cora Ö. N. Ballistic performances of Ramor 500 and Ramor 550 armor steels at mono and bilayered plate configurations. Engineering Science and Technology, an International Journal. – 2021. № 24. DOI: 10.1016/j.jestch.2021.01.001
Jinnapat A., Doungkom С., Somton K., Dateraksa K. Ballistic performance of composite armor impacted by 7.62 mm armor projectile. Journal of Metals, Materials and Minerals. – 2023. № 33. С.120-127. DOI: 10.55713/jmmm.v33i2.1698
Ryan S., Li H., Edgerton M., Gallardy D., Cimpoeru S. J. The ballistic performance of an ultra-high hardness armour steel: An experimental investigation. International Journal of Impact Engineering. – 2016. № 94. DOI: 10.1016/j.ijimpeng.2016.03.011
Muskeri S., Jannotti С., Schuster B., Lloyd J., Mukherjee S. Ballistic Impact Response of Complex Concentrated Alloys. International Journal of Impact Engineering. – 2021. № 161. С. 104091. DOI: 10.1016/j.ijimpeng.2021.104091
Khalaf W., Hamzah M. Experimental and numerical studies of ballistic resistance of hybrid sandwich composite body armor. Open Engineering. – 2024. № 14. DOI: 10.1515/eng-2022-0543
Gupta С., Iqbal M. A., Mohammad Z., Baqi A., Gupta N. K. Energy absorption in thin metallic targets subjected to oblique projectile impact: A numerical study. Thin-Walled Structures. – 2017. № 126. DOI: 10.1016/j.tws.2017.08.005
Ryan S., Berk J., Weiss A., Yatom N., Vardy M., Rana S., Greenhill S., Venkatesh S. (2022). Adaptive Experimental Optimisation for Sample-Efficient Armour Design. – 2022. DOI: 10.12783/ballistics22/36177
Bekci, M. L., Canpolat B. H., Usta E., Güler M. S., Cora Ö. N. Ballistic performances of Ramor 500 and Ramor 550 armor steels at mono and bilayered plate configurations. Engineering Science and Technology, an International Journal. – 2021. № 24(4). С. 990-995. DOI: 10.1016/j.jestch.2021.01.001
Wei H., Zhang X., Liu C., Liu J., Li С. A three-dimensional penetration trajectory model for ogive-nosed projectile into metal targets. International Journal of Impact Engineering. – 2021. № 157. С. 103998. DOI: 10.1016/j.ijimpeng.2021.103998
Fras T. On the effect of pitch and yaw angles in oblique impacts of small-caliber projectiles. Defence Technology. – 2024. № 31. С. 73-94. DOI: 10.1016/j.dt.2023.06.004
Li L., Zhang Q. C., Lu, T. J. Ballistic penetration of deforming metallic plates: Experimental and numerical investigation. International Journal of Impact Engineering. – 2022. № 170 С. 104359. DOI: 10.1016/j.ijimpeng.2022.104359
Fayrushin A. M., Chernyatyeva R. R., Yakovleva D. N. The effects of vibration treatment in the process of welding on the structure of metal of seam weld. In IOP Conference Series. Earth and Environmental Science. – 2020. № 6. С. 459. DOI: 10.1088/1755-1315/459/6/062110
Naidu M. C., Padal K. T., Eshete G. Influence of Heat-Treated and Vibratory-Assisted Weld Joints on the Mechanical Properties of 304L SS Material. Journal of Nanomaterials. 2022. № 4. С. 1-9. DOI: 10.1155/2022/1000859
