INTERNATIONAL EXPERIENCE IN THE USE OF FLYSHAPE SOFTWARE FOR INDIVIDUALIZED THREE-DIMENSIONAL MODELING OF LOWER LIMB PROSTHESES
DOI:
https://doi.org/10.34185/1991-7848.itmm.2025.01.082Keywords:
healthcare, medical information systems, prosthetics, orthotics, modeling, three-dimensional scanning, three-dimensional printing, artificial limbsAbstract
Rehabilitation engineering is currently the most relevant area in Ukraine, requiring modern solutions and innovative technologies. The development of bionic limbs, automated systems for replacing lost human organs and functions can significantly improve the quality of life and accelerate the functional recovery of military and civilians. The growing need for rehabilitation solutions requires rapid adaptation of global achievements in the field of prosthetics and orthotics, in particular due to limited resources and the need to scale assistance. The purpose of this research work is to analyze the possibility of using the Flyshape software tool to create individualized 3D models of lower limb prostheses, as well as to demonstrate its potential. An important step for creating personalized prostheses is an accurate three-dimensional scan of the patient's stump, which allows taking into account its anatomical features, shape and size.
References
O. Korolovych, K. Selivanova, Y. Nosova and M. Tymkovych, "Physical Rehabilitation System of the Upper Extremities Muscle Dysfunction," 2024 IEEE 17th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET), Lviv, Ukraine, 2024, pp. 1-6, doi: 10.1109/TCSET64720.2024.10755903.
Tymkovych, M., Avrunin, O., Selivanova, K., Kolomiiets, A., Bednarchyk, T., & Smailova, S. (2024). CORRESPONDENCE MATCHING IN 3D MODELS FOR 3D HAND FITTING. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 14(1), 78–82. https://doi.org/10.35784/iapgos.5498
Korolovych O. S. Basic requirements for the process of physical rehabilitation of muscle dysfunction of the upper extremities / O. S. Korolovych, K. G. Selivanova // Information technology: science, technology, technology, education, health: abstracts of the XXXII International Scientific and Practical Conference MicroCAD-2024, May 22-25, 2024 - Kharkiv: NTU “KHPI.” - P. 1342.
Integration of open educational resources for Ukrainian students: international experience and cooperation in crisis circumstances / A. Sokolov, K. Selivanova, Y. Nosova, A. Boyechko-Nemovcha // Electricity, electromechanics and technologies in the agro-industrial complex: materials of the International scientific and practical conference, November 6, 2024 - Kharkiv: State Biotechnology University, 2024. - P. 251-252.
Selivanova K. G. Using the capabilities of an intelligent robot to accelerate the process of physical rehabilitation of hands / K. G. Selivanova, O. G. Avrunin // Current state and prospects of biomedical engineering: materials of the International scientific and practical conference dedicated to the 125th anniversary of the National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, December 13-14, 2023 - Kyiv : Igor Sikorsky Kyiv Polytechnic Institute, 2023.
