Дослідження динамічних властивостей частотно-регульованого електропривода механізму пересування електродів дугової електропечі шляхом математичного моделювання
DOI:
https://doi.org/10.34185/1991-7848.itmm.2020.01.005Ключові слова:
ПЕРЕТВОРЮВАЧ ЧАСТОТИ, АСИНХРОННИЙ ДВИГУН, ДУГОВА ЕЛЕКТРОПІЧ, СИСТЕМА АВТОМАТИЧНОГО РЕГУЛЮВАННЯ, РЕГУЛЯТОР, ПЕРЕХІДНІ ПРОЦЕСИ, МАТЕМАТИЧНА МОДЕЛЬ, СКАЛЯРНЕ КЕРУВАННЯ, ВЕКТОРНЕ КЕРУВАННЯАнотація
Considered literature devoted to the modernization of control systems, controllers and variable-frequency drive mechanism for movement of the electric arc furnace electrodes. The research of current and proposed drives through mathematical modeling. Models of the control system of the electrode mechanism for the basic and proposed variants with scalar and vector control are made in the MATLAB software. Survey on simulation models confirmed that the system provides vector control speed transient time 16% less than the DC system and a static error is 0% to 3%. The implementation of the electric drive of the mechanism of movement of electrodes based on the frequency converter with vector control and an induction motor is a promising direction of modernization.
Посилання
Mineev A.R. Modeling of Electrotechnological Processes and Installations. // A.R. Mineev, A.I. Korobov, M.Ya.Pogrebiskiy - M .:Sputnik +, 2004. - 124 p.
Paranchuk Y.S., Golovach V.R. Research of the factors of influence on the electric mode of the arc steelmaking furnace with the ARDM-T controller // Scientific Bulletin of Vinnitsa Polytechnic Institute.
Popov A.E. Application of frequency control of the drive of moving electrodes in automatic regulators of arc electric furnaces. // News of higher education institutions, series "Electromechanics" - 2005- №2- p.78-80.
Lozynsky O.Yu., Paranchuk Y.S., Paranchuk R.Y., Matiko F.D. Development of computer simulation methods and tools for the study of electric modes of an arc furnace. // Scientific Bulletin of the National Technical University "Kharkiv Polytechnic Institute". , series "Electrical Engineering and Electromechanics".- 2018.-№3.-p.28-37.
