WAYS TO IMPROVE THE TECHNOLOGY OF PRODUCTION OF HOT-EXTRUDED TUBES HIGH-ALLOYED STEELS AND TITANIUM BASED ALLOYS

Authors

  • Yaroslav Frolov
  • Volodymyr Berezos
  • Michael Medvedev
  • Oleksandr Bobukh
  • Andriy Samsonenko

DOI:

https://doi.org/10.34185/1991-7848.itmm.2022.01.016

Keywords:

hot-extruded, titanium, mechanical properties, microstructure, austenitic steels

Abstract

Sustainable development of human civilization as well as responsible manufacturing require new approaches to metallurgical production chains. A major part of that requirements lies in plane of solid-state treatment of high alloyed steels and Ti-based alloys. In this work we pay an attention to the development of production of tubes of these alloys, which are widely used in energy and chemical engineering. The aim of research – an excellent microstructure, what is the warrant of the set of mechanical properties attractive for customers. The aim is reached through the creation of the deformation mode, which includes wall-thickness and diameter strain distribution, thermal balance along the treatment and auxiliary operation. That mode consists of the solutions, providing measurable considering of current chemical composition of the incoming billet. Applied approach results in fine adjustment of the solid-state treatment to the potential of chemical composition of the billet.

References

Experimental estimation of maximal ductility and flow curves of titanium alloys with hot-torsion tests / М. Medvediev, Y. Frolov, V. Andreiev [and others] // Metallurgical and Ore Mining Industry. – 2019. – №5-6. – C. 114–122.

https://doi.org/10.34185/0543-5749.2019-5-6-114-122

Improving the complex of quality indicators of pipes made of corrosion-resistant steel grades supplied according to foreign standards / Вахрушева В. С., Буряк Т. Н., Лёткин А. М. [and others] // Modern problems of metallurgy. – 2008. – №11. – C. 248–254. – https://journals.nmetau.edu.ua/index.php/mpm/issue/view/27/9

Evaluating deformation resistance during hot extrusion of tubes from nickel-based alloys / M. Medvedev, V. Andreiev, Y. Frolov, O. Bobukh // Material working by pressure. – 2019. – №2 (49). – C. 150–155. – https://doi.org/10.37142/2076-2151/2019-2(49)150

Patent. 148925 Ukraine. Method of pressing pipes made of austenitic Steels. МПК (2021.01) В21С 23/00 В21С 37/00 / Medvediev М., Frolov Y., Shifrin Ye., Bondarenko S.; Bobukh O.; applicant and owner National Metallurgical Academy of Ukraine .- № u 2021 02667; Application date 21.05.2021; Issue date 29.09.2021, Bul. №39. - 4 с. - https://sis.ukrpatent.org/uk/search/detail/1629042/

Patent. 77963 Ukraine. Method for manufacturing pipes of austenitic steels. МПК (2006.01) В21С 23/08 / Panchenko S., Horhul S., Medvediev М., Bezpalova N., Baliev А., Tiper Е., Zakharchenko О., Krasiuk А., Chekmariov V.; applicant and owner «CENTRAVIS PRODUCTION UKRAINE» PJSC and «Osada research and design technological institute of pipe industry» .- № u201206408; Application date 28.05.2012; Issue date 11.03.2013, Bul. №5. - 5 с. - https://sis.ukrpatent.org/uk/search/detail/1207403/

Published

2022-05-18

Issue

Section

Статті