Prospects for the use of integrated technologies of gas-dynamic impact on the melt in the mold

Authors

  • Vadim Selivyorstov
  • Tatjana Selivyorstova

DOI:

https://doi.org/10.34185/1562-9945-5-130-2020-14

Keywords:

комплексна технологія, форма, виливниця, розплав, вплив, виливок, злиток, інертний газ, продувка, вакуумування, газодинамічний тиск, герметизація, пристрій, розрахунок

Abstract

Trends in expanding the range of steel ingots, instability and crushing of orders at existing foundries that do not have additional specialized equipment, high capital costs for global technical re-equipment, necessitate the search for new technological ways to obtain quality products. Therefore, more and more attention of scientists and practitioners is attracting questions related to improving existing and developing new processes to improve the quality of cast metal, reduce the cost of producing products, and increase the degree of environmental friendliness of production in general. One of such recognized ways to improve the quality of cast billets is the use of external physical effects on the liquid metal, and the metal that crystallizes directly in the mold.
The paper presents an analysis of scientific and technical information on the use of out-of-furnace processing processes and the use of gas pressure to improve the quality of cast metal of large castings or ingots. The prospects of using these effects for processing the melt directly in the mold is shown. The possibility of implementing a process of complex in-situ gas-dynamic impact on the melt of large castings and ingots, which consists of sequential inert gas blowing through a siphon sprue system, evacuation and subsequent gas-dynamic pressure in the solidification process using the appropriate devices. Specific options for their design and technological features of the work are determined.
A distinctive feature of the technology is that during the entire process from the onset of solidification, the metal is affected by the creation of an adjustable gas pressure in a sealed casting-gas injection system. The proposed device is structurally simple and can be easily integrated into an existing process without the need for significant capital costs.
The need for further research to develop a common methodology for determining the duration of the purge, and rational modes of intra-molten melt evacuation of the sealed casting system - a device for gas-dynamic effects.

References

Derzhavska A. V. Suchasnyi stan haluzi mashynobuduvannia ta tendentsii yii rozvytku / A.V. Derzhavska, P.V. Krush // Naukovyi visnyk Uzhhorodskoho natsionalnoho universytetu, Seriia: Mizhnarodni ekonomichni vidnosyny ta svitove hospodarstvo. - Vypusk 21, chastyna 1. – 2018. – S. 69 – 73.

Smirnov A.N. Large ingot / A.N. Smirnov, S.L. Makurov, V.M. Safonov, A.Yu. Tsuprun; Donetsk national tech. un-t - Donetsk: publishing house "Weber" (Donetsk branch), 2009. - 278 p.

Efimov V.A. Modern technologies of casting and crystallization of alloys / V.A. Efimov, A.S. Eldarkhanov. - M.: Mechanical Engineering, 1998 .-- 359 p.

Smirnov A.N. Metallurgical mini-plants / A.N. Smirnov, V.M. Safonov, L.V. Dorokhova, A.Yu. Tsuprun .- Donetsk: Nord-Press, 2005 .-- 449 p.

Zhuliev S.I. Production and quality problems of a forging ingot / S.I. Zhuliev, I.A. Zyuban: Monograph / Volga. GTU. - Volgograd, 2003 .-- 168 p.

Dyudkin D.A. Steel production at the ladle-furnace assembly / D.A. Dyudkin, S.Yu. Bat, S.E. Greenberg, S.N. Marintsev. - Donetsk: Southeast, LTD, 2003. - 300 p.

Kolomoets D. Processing of metal by vacuum [Electronic resource] / Dmitry Kolomoets // Metallurgist.pro. - 2020. - Access mode to the resource: https://metallurgist.pro/obrabotka-metalla-vakuumom/.

Kolomoets D. Purge metal with inert gases [Electronic resource] / Dmitry Kolomoets // Metallurgist.pro. - 2020. - Access mode to the resource: https://metallurgist.pro/produvka-metalla-inertnymi-gazami/.

Application No. 59-215248. Japan. MKI V22D 7/00, V22D 18/04. Steel casting method / Shin Nippon seitsetsu K.K. (Japan); Claim 25. 05. 83; Publ. 05.12.84./ Technology and equipment of foundry.-1986.- No. 1,1G191P.- S. 36.

Seliverstov V.Yu. The technology of gas-dynamic impact on the melt in the mold is one of the promising ways to improve the quality of metal castings // Modern problems of metallurgy. Initial works. 2007. - Volume 10.-P. 25 - 35.

Khrychikov V.E., Seliverstov V.Yu., Scheglova TS, Menyaylo SV Reducing the volume of shrinkage defects in the lower necks of cast-iron rolling rolls // Theory and Practice of Metallurgy. Dnepropetrovsk, 2001, No. 5, pp. 77-80.

Seliverstov V.Yu. Technology for displacing the melt from the riser into the casting // Theory and Practice of Metallurgy. - 1999. - No. 4. - S. 12–13.

Pat. 28858 Ukraina, MPK (2006) V22D 18/00. Sposib otrymannia vylyvkiv / Selivorstov V.Iu., Khrychykov V.Ie., Dotsenko Yu.V. – № 200708968; zaiavl.03.08.2007; opubl. 25.12.2007, Biul.№21.

Pat. 28859 Ukraina, MPK (2006) V22D 18/00. Prystrii dlia otrymannia vylyvkiv / Selivorstov V.Iu., Khrychykov V.Ie., Dotsenko Yu.V. – № 200708969; zaiavl.03.08.2007; opubl. 25.12.2007, Biul.№21.

Pat. 37838 Ukraina, MPK (2006) V22D 18/00. Sposib otrymannia vylyvkiv / Selivorstov V.Iu., Khrychykov V.Ie., Dotsenko Yu.V. – № 200808859; zaiavl.07.07.2008; opubl. 10.12.2008, Biul.№23.

Pat. 37837 Ukraina, MPK (2006) V22D 18/00. Prystrii dlia otrymannia vylyvkiv / Selivorstov V.Iu., Khrychykov V.Ie., Dotsenko Yu.V. – № 200808858; zaiavl. 07.07.2008; opubl. 10.12.2008, Biul.№23.

«Metodyka rozrakhunku rezhymu hazodynamichnoho vplyvu na rozplav v lyvarnii formi»; svidotstvo pro reiestratsiiu avtorskoho prava na tvir /Selivorstov V.Iu. – № 34833; data reiestratsii 06.09.2010.

Seliverstov V.Yu. Method for calculating the parameters of gas-dynamic effects on the hardened metal in the mold / V.Yu. Seliverstov, T.V. Mikhailovskaya // System Technologies. - Dnepropetrovsk, 2010. - Issue. 3 (68). - S. 186 - 192.

Seliverstov V.Yu. Features of the calculation of the regime of gas-dynamic influence on the melt during crystallization of castings from steel 35L, Kh18F1 and aluminum alloy AK5M in metal form / V.Yu. Seliverstov // Theory and Practice of Metallurgy. - 2010. - No. 1 - 2. - S. 64 - 67.

Selivorstov V.Iu. Avtomatyzovane vyznachennia rezhymu hazodynamichnoho vplyvu na rozplav v lyvarnii formi /V.Iu. Selivorstov, T.V. Mykhailovska //Systemni tekhnolohii: Rehionalnyi mizhvuzivskyi zbirnyk naukovykh prats. – Dnipropetrovsk, 2010. – Vyp. 4 (69). – S. 73 – 78.

Kompiuterna prohrama «GDICalc»; svidotstvo pro reiestratsiiu avtorskoho prava na tvir /Selivorstov V.Iu., Mykhailovska T.V. – № 34834; data reiestratsii 06.09.2010.

Published

2020-05-04