Comprehensive technical and economic analysis of the influence of the design of top blowing devices on the main indicators of steel production in oxygen converters

Authors

  • Lavr Serhiiovych Molchanov
  • Anatolii Gryhorovych Cherniatevych
  • Volodymyr Viktorovych Vakulchuk
  • Olena Anatoliivna Chubina

DOI:

https://doi.org/10.34185/1991-7848.2019.01.07

Keywords:

economic assessment, design of the top blowing lance, technical and economic indicators, oxygen converter, secondary energy resource

Abstract

The article presents the results of the analytical estimation of the impact of the design of the top blowing devices on the main technical and economic indicators of the steelmaking process in oxygen converters with bottom blowing with neutral gas. A comprehensive economic assessment was based on summing up the deviation of relative production costs for crude steel melting (the cost of basic charge materials), without taking into account the cost of upgrading the main process equipment. According to the results of the carried out research, it has been determined that application of the classical design of the oxygen lance, the net calorific value of the converter gas is 10 MJ/m3. In comparison with the classical design, the two-tier, two-circuit and three-tier lances ensure a reduction in the net calorific value of the converter gas by 8.5, 4.4 and 27.1% rel. respectively. When compensating for reducing the net calorific value of exhaust gases with natural gas and taking into account all the main parameters of the steelmaking process, the savings amount to $ 3.23 / ton of steel for two-circuit, $ 6.81 / ton of steel for two-circuit and 11.61 $ / ton steel – for the three-tier lances, compared with the use of the classical design.

References

Boychenko B.M., Ohotskiy V.B., Harlashin P.S. Konverterne virobnitstvo stalI: teorIya, tehnologIya, yakIst stalI, konstruktsIYi agregatIv, retsirkulyatsIya materIalIv I ekologIya: PIdruchnik. – DnIpropetrovsk: RVA «DnIpro-VAL». – 2004. – 454s.

Ryizhavskiy A.Z., Pirogov A.Yu., Zimoglyad A.V. Rekonstruktsiya gazootvodyaschih traktov bolshegruznyih konverterov // Ekologiya i promyishlennost.-2017.- # 3-4.-S. 4-10.

Rabota 130-t konverterov, oborudovannyih dvuh'yarusnyimi furmami /

V.I. Baptizmanskiy, V.O. Kulikov, A.T. Kitaev [i dr.] // Ekspress-informatsiya TsNII i TEI ChM.- 1974.- seriya 6.- vyip.-3.- S. 1-14.

Boichyk I.M. Ekonomika pidpryiemstva: navchalnyi posibnyk. - K.: Atika, 2004. - 480c.

DSTU 3581 – 97 «Enerhozberezhennia. Metody vymiriuvannia i rozrakhunku teploty zghoriannia palyva» - K.:Derzhstandart Ukrainy. – 1999. – 12s.5.

Berezhinskiy A.I., Tsimmerman A.F. Ohlazhdenie i ochistka gazov kislorodnyih konverterov. – M.: Metallurgiya. – 1983. – 272 s.

Kombinirovannaya produvka metalla s podachey neytralnogo gaza sverhu i cherez dnische konvertera / A.G. Chernyatevich, R.S. Ayzatulov, L.M. Uchitel [i dr] // Stal.- 1989. –#5. –

S. 20 – 23.

K voprosu povyisheniya promyishlennoy bezopasnosti konverterov i ekologicheskoy bezopasnosti protsessov vyiplavki stali / L.G. Tuboltsev, V.P. Korchenko, V.F. Polyakov [i dr] // Sbornik nauchnyih trudov IChM NANU «Fundamentalnyie i prikladnyie problemyi chernoy metallurgii».-2011. - vyip. 24. -S. 258-272

Vyisokotemperaturnoe modelirovanie produvki konverternoy vannyi s ispolzovaniem dvuh'yarusnoy kislorodnoy furmyi / A.G. Chernyatevich, V.V. Vakulchuk, L.S. Molchanov

[i dr] // Teoriya i praktika metallurgii.- 2017. – # 3-4. –S. 79 – 85.

Molchanov L.S., Vakulchuk V.V. Gazodinamicheskie osobennosti produvki konverternoy vannyi cherez dvuhkonturnuyu furmu // Innovatsionnyie puti modernizatsii bazovyih otrasley promyishlennosti, energo- i resursosberezhenie, ohrana okruzhayuschey prirodnoy sredyi: sbornik nauchnyih trudov VI Mezhdunarodnoy nauchno-prakticheskoy konferentsii molodyih uchenyih i spetsialistov, Harkov, 22 – 23 marta 2017 g. – H.: GP «UkrNTTs «Energostal».-2017. – S. 102 – 108.

Termodinamicheskoe i vyisokotemperaturnoe modelirovanie kombinirovannoy produvki konverternoy vannyi s ispolzovaniem treh'yarusnoy kislorodnoy furmyi /

A.G. Chernyatevich, L.S. Molchanov, P.O. Yushkevich, M.K. Chubin // Sbornik nauchnyih trudov IChM NANU «Fundamentalnyie i prikladnyie problemyi chernoy metallurgii». –

– vyip. #31. – S. 110 – 121.

Krivandin V.A., Egorov A.V. Teplovaya rabota i konstruktsiya pechey chernoy metallurgii: Uchebnik dlya vuzov. – M.: Metallurgiya, 1989. – 462s.

Efimenko G.G., Gimmelfarb A.A., Levchenko V.E .Metallurgiya chuguna - K.: Vyisshaya shkola. Glavnoe izdatelstvo, 1981. – 496 s.

Gubinskiy V.I. Metallurgicheskie pechi: Ucheb. posobie. - Dnepropetrovsk: NMetAU, 2006. – 85s.

Published

2019-11-06